Browse Our Catalog

Direct Boxes - Page 7 - On Sale Now! Save up to 8%

On Sale! Up to 8% off on Direct Boxes at Riot Recordings, Page 7. Top brands include Palmer, Radial, Elite Core, Mackie, Behringer, ammoon, RDL, Generic, ART, Samson, Whirlwind, Radial Engineering, Hughes & Kettner, & Rupert Neve Designs. Hurry! Limited time offers. Offers valid only while supplies last.

Palmer PAN04 2-Channel Passive DI Box
By Palmer
In Stock

mpn: PAN04, ean: 4049521049033,

4.7 out of 5 stars with 144 reviews
The PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This ''stereo'' configuration makes it ideally suited for use with certain keyboards and devices which have several outputs. Jack input with parallel ''THRU'' output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals.2 Channel Passive DI Box. Jack input with parallel THRU. Can handle line and speaker level signals.

Radial Engineering X-Amp Active Reamplifier Xamp (Yellow) w/ 3 Cables
By Radial
In Stock

mpn: R8001028, ean: 0799491175938,

4.1 out of 5 stars with 46 reviews
The Radial X-Amp is an active ReamperTM that allows the engineer to play a pre-recorded track back through guitar amplifiers and pedals. This opens the door to explore new musical sounds and spur on the creative process so that your recording stands out. Using the X-Amp is easy: start by recording a dry track using a high quality direct box like the Radial J48. Send the new track from your recorder via the X-Amp to your guitar amps, effect pedals or combinations thereof. Once the basic track

Elite Core DIR-2 Premium Dual Mono/Stereo Direct Box
By Elite Core
In Stock

mpn: DIR-2, ean: 0759681005513,

4.2 out of 5 stars with 103 reviews
Elite Core DIR-2 Premium Dual Mono/Stereo Direct BoxGreat for Keyboardists, Acoustic & Electric Guitarists, Bassists, and other instrumentalists needing to plug into the snake on stage. Converts your hi-z input to lo-z to make your signal-to-noise ratio as low as possible. Two inputs and outputs for stereo or dual mono sources. Dual 1/4'' input XLR and 1/4'' output.

Mackie Signal Direct Box (MDB-USB)
By Mackie
In Stock

mpn: 2049174-00, ean: 0663961054019,

4.6 out of 5 stars with 97 reviews
With the bus-powered MDB-USB stereo DI, the days of relying on your headphone jack to get audio from a computer into analog gear are over. Combining a high-resolution audio interface with a noise and distortion-free stereo DI, MDB-USB converts your digital audio into clean, balanced, stereo output. Featuring an output level control, headphone output, and mono sum for maximum versatility. Analog outputs are dual XLR with ground lift. USB cable included.Connect your computer directly via USB. High

By Behringer
In Stock

mpn: PP400, ean: 9789800328811, isbn: 9800328815,

4.0 out of 5 stars with 51 reviews
BEHRINGER MICROPHONO PP400 Ultra-Compact Phono Preamp Converts your phono signal to a line level signal State-of-the-art phono preamp to accommodate all magnetic pickups Dedicated RCA and 1/4'' TRS output connectors DC 12 V adapter included High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany In the age of the MP3, it can be easy to forget that a turntable signal needs a little help before it reaches a mixer or home

ammoon AROMA AMX-5 Cabinet Simulator DI Box Guitar Effect Pedal Transfers Guitar/Bass Signal Directly to Audio System Aluminum Alloy Body
By ammoon
In Stock
You Save: 8%

mpn: OAO7447292625089IG, ean: 0714973656347,

4.6 out of 5 stars with 91 reviews
Specifications: Color: Black Material: Aluminum Alloy Input Impedance: 1M Ohms Output Impedance: 1k Ohms Power Supply: DC 9V Current Draw: 12mA Item Size: 3.8 * 9.5 * 3.2cm / 1.5 * 3.7 * 1.3in Item Weight: 147g/ 5.2oz Package Size: 7 * 12.5 * 6.5cm / 2.8 * 4.9 * 2.6in Package Weight: 242g / 8.5ozPackage List: 1 * Guitar effect PedalTransfers guitar or bass signal directly to audio system.. Gain switch for boosting low level signal: -20dB/ 0dB/ +20dB.. Supports cabinet simulator control and groun

RDL EZ-SX4 Stereo Audio Input Switcher
In Stock

mpn: EZ-SX4, ean: 0813721010148,

4.6 out of 5 stars with 136 reviews
Radio Design Labs EZ-SX4 serial audio input switcherRADIO DESIGN LABS EZSX4 serial audio input switcher.

Kopul High-Performance Passive Direct Box
By Generic
In Stock

mpn: PDI40, ean: 0847628574670,

4.6 out of 5 stars with 58 reviews
The Kopul PDI-40 High-Performance Passive Direct Box lets you connect an unbalanced, high-impedance signal to a balanced, low-impedance input. It is most often used for plugging a keyboard, electric guitar, or electric bass guitar directly into a mixing console's microphone-level input. The PDI-40 can also be used in DJ applications for converting unbalanced +10 dB DJ mixer signals to balanced, line-level signals. This allows you to connect your DJ mixer to a mixing console and cuts down on

ART Dual Pre PS 2 Channel USB Preamp DualPre Project Series w/ Microfiber Geartr
In Stock

mpn: USBDUALPREP, ean: 0607595981129,

4.9 out of 5 stars with 36 reviews
The USB Dual Pre is a full-featured high quality dual portable preamplifier and computer interface packed into a compact rugged case. It is designed to work over a wide variety of applications from remote field recording to desktop/studio tracking. Each of the two low noise input channels has up to 48 dB of clean gain with signal present and clip LED indicators. Inputs can be either XLR balanced or 1/4-inch TRS. Each of the 1/4-inch TRS outputs is buffered low impedance balanced. The built-in

Samson S-Max MD1 Professional Passive Mono Direct DI Box,18Hz40kHz+Headphones
By Samson
In Stock

mpn: SAMD1PRO+SASR350, ean: 0613815862512,

4.8 out of 5 stars with 47 reviews
Samson STLX Mu-Metal Shielded Transformer -15 dB and -30 dB Attenuation Settings Ground Lift Switch 1/4'' Input and Thru Balanced XLR OutputAll-metal, impact resistant design. Samson STLX Mu-Metal shielded transformer. 3-position 0dB/-15dB/-30dB attenuation switch. Ground Lift switch. 1/4'' Input and Thru.

Whirlwind PCDI Audio Direct Box with 1/8" hardwired input tail - PCDI-HW
By Whirlwind
In Stock

mpn: 4852720745, ean: 0692465023207,

4.7 out of 5 stars with 112 reviews
The Whirlwind pcDIhwb is a PCDI with a hard wired tail terminated with a stereo 3.5mm plug, perfect for interfacing the outputs of CD players, computer sound cards, iPODs® / MP3 players, tape decks, etc. with professional, balanced, low impedance equipment. (with no chance of losing the cable).

Palmer PAL-PLI01 Line Isolation Box 1 Channel
By Palmer
In Stock
You Save: 1%

mpn: PLI01, ean: 4049521049293,

4.9 out of 5 stars with 105 reviews
Mono isolation transformer (line isolator), equipped with 1/4'' TRS jack sockets at both ends for balanced and unbalanced signals. Especially suitable for eliminating ground loops that cause hum. Conversion from unbalanced to balanced is possible. A two-channel version can be found under product number PLI05. Single channel unit in a small rugged die cast box. Especially useful in guitar rack systems where multiple signal processors and preamplifiers are combined. Also eliminates noise in car

Whirlwind"Connect" Series EDB1 Direct Box with Pad and 25FT XLR Male - XLR Female Mic Cable
By Whirlwind
In Stock

mpn: WWEDB1_K1, ean: 0657379045073,

4.7 out of 5 stars with 35 reviews
An imported economy direct box offering rugged construction while maintaining exceptional sound quality. Features include: 1/4'' In and Through jacks XLR output Pad switch for connection to ''hot'' signal sources Ground Lift switch to help isolate hum and buzz Metal construction and quality transformer Bundle Includes: Whirlwind ''Connect'' Series EDB1 Direct Box with Pad Kirlin 25FT XLR Male - XLR Female Microphone CableFEATURES: A metal construction and quality transformer with 1/4'' In

ART T8 8-Channel Transformer Isolator
In Stock

mpn: ARTT8, ean: 0840402016458,

4.7 out of 5 stars with 63 reviews
High-quality passive audio interface uses 8 transformers to separate input and output signal grounds, isolating 2 systems and reducing hum and ground-loop noise. The T8's audio transformers have flat, wide frequency response and handle high signal levels while maintaining an isolated balanced output. This allows a clean, neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed for 600 ohm to 100kOhm impedance. XLR, 1/4'', and RCA

Radial JDX Reactor
By Radial
In Stock

mpn: R800 1400, ean: 0676101035779,

4.1 out of 5 stars with 14 reviews
The Radial JDX Reactor guitar amp direct box lets you capture your amp's true sound while allowing a direct feed to a PA or recorder. Using Class A circuitry, multi-stage filtering, and effective cabinet emulation, the JDX Reactor produces a realistic amp sound in a direct feed. If you want a more manageable, consistent onstage sound, or want to use your amp to record without waking the neighbors, this box is just what the doctor ordered. If miking your amp isn't a viable option, or you just

Radial Catapult TX4 Cat 5 Analog Snake Transmitter with 4 XLR-F Inputs
By Radial Engineering
In Stock

mpn: SRA CATAPULT-TX4, ean: 0676101044351,

4.3 out of 5 stars with 143 reviews
Why you need the Radial Catapult TX4 Cat 5 Analog Snake Transmitter with 4 XLR-F Inputs:The Radial Catapult is a 4-channel audio snake that lets you send analog or AES digital audio signals over standard Cat 5 or Cat 6 shielded twisted pair cable. This allows stage techs to take advantage of the relatively low cost of this abundantly available cable for return snakes or for transporting balanced audio across a large stage. For the system contractor, the Catapult lets you take advantage of

Hughes & Kettner Red Box 5 DI and Speaker Simulator w/Microfiber Geartree Cloth
By Hughes & Kettner
In Stock

mpn: REDBOX5, ean: 0607595981891,

4.2 out of 5 stars with 100 reviews
The Red Box does not sound like a micâ€TMed cab, it sounds like the cab itself! Thanks to this clear, direct sound, a Red Box will endear you to every seasoned PA tech and studio engineer. And the secret behind many of today‘s best sounding guitar tracks is, that they are double-tracked with a microphone and a Red Box, or that the pure Red Box signal is run through microphone- and room emulating software plug-ins. This enables a perfect mix of ambience and ultra-direct attack.Input:

Radial Engineering SGI44 Studio Guitar Interface
By Radial Engineering
In Stock

mpn: SRA SGI-44, ean: 0676101039456,

4.0 out of 5 stars with 68 reviews
Radial SGI-44 Studio Guitar Interface. Manages 4 guitars and 6 amps at once..

Rupert Neve Designs RNDI-S Stereo Active Transformer DI
By Rupert Neve Designs
In Stock

mpn: 27974, ean: 0752423657414,

4.8 out of 5 stars with 52 reviews
The RNDI-S signature sound is the product of custom Rupert Neve Designs transformers and class-A biased, discrete FET amplifiers. The carefully orchestrated union of these two elements is key to the unique response of the RNDI-S, delivering a powerful and vibrant direct sound capable of reproducing the full harmonic depth of basses, guitars, keyboards, acoustic instruments, professional line-level sources and consumer devices with a 3.5mm jack. With portable, powerful, larger-than-life tone,

Radial Engineering JDI Duplex Mk4 Stereo DI Passive Direct Box w/ 4 Cables
By Radial
In Stock

mpn: R8001020, ean: 0799491175921,

4.6 out of 5 stars with 11 reviews
Now with dual -10dB RCA connectors and dual +4db XLR inputs. Passive DI employs a Jensen isolation transformer for optimum audio performance offering outstanding linearity at all frequencies, combined with extraordinary level handling without introducing distortion. The completely passive plug & play JDI does not require any power and has the unique advantage of eliminating 60-cycle ground loops. This makes it a definite favorite with informed audio engineers. Great for guitars, bass, and

Viewing Page 7 of 10

View more products in Signal Processors.
Feel free to Browse Our Catalog.

Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - All Rights Reserved.