Power Limiter for RF Explorer
On Sale Now! Save 10% on the Power Limiter for RF Explorer by seeed studio at Riot Recordings. MPN: 109990003. Hurry! Limited time offer. Offer valid only while supplies last. The Power Limiter for RF Explorer Meters is a custom device designed from scratch to be the perfect protection against strong RF fields. All RF Explorer models have some power ranges for input signal beyond which can be damaged. For most models, the limit is on +5dBm, some others are ok up to +10dBm but only WSUB3G (as well as the RF SMA connector on the right side in a 3G Combo) is protected up to +30dBm. The new RF Explorer Power Limiter will allow any RF Explorer model to be protected with
Product Description & Reviews
The Power Limiter for RF Explorer Meters is a custom device designed from scratch to be the perfect protection against strong RF fields. All RF Explorer models have some power ranges for input signal beyond which can be damaged. For most models, the limit is on +5dBm, some others are ok up to +10dBm but only WSUB3G (as well as the RF SMA connector on the right side in a 3G Combo) is protected up to +30dBm. The new RF Explorer Power Limiter will allow any RF Explorer model to be protected with external signals up to +30dBm (1 Watt), so you get the same level of protection as in the WSUB3G. Furthermore, the power limiter includes additional functionality inside that will otherwise require external devices increasing cost and size: Power limiter: With protection up to +30dBm, for any frequency range between DC-3000Mhz DC block: You are able to connect any external DC source up to 16V with no risk of damaging your RF Explorer or interfering in your measurement. Attenuator: Includes an internal 6dB attenuator to help you extend the range of power signal measurements. 6dB attenuation means only ¼ of the input power is received by the unit. To compensate for this extra attenuation you should indicate OffsetDB:+006 in the ATTENUATOR MENU of your RF Explorer. The Power Limiter is assembled in a aluminum case and it is very compact when compared to other comparable products, not to mention it includes internal DC block and attenuator which makes it a really small device for what it offers. It is a recommended add-on to all RF Explorer users who potentially will expose their unit to strong external fields. Additional Specifications: Output power max: +4 dBm. Attenuation: 6 dB Impedance (Nominal): 50Ω V.S.W.R (Max): 1.25 : 1 Connector type: SMA male - female Connector: Brass / Gold plating
Features & Highlights
- 3-in-1 device with Power Limiter, DC Block and Attenuator
- Frequency range: DC ~ 3.0 GHz
- DC block: +16V DC
- Input Power rating: 1 Watt (+30dBm)
- Wide broadband frequency application
1.18 x 0.79 x 1.97 inches
3.3 x 1.2 x 3.7 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by seeed studio, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By TC Electronic
mpn: VoiceLive Touch, ean: 5706622010155,
The first vocal processor and looper at your fingertipsVocal harmony & effects. VLOOP - performance vocal looping of vocals and guitar input including effects. Instant touch interface with bright, easy to read, scrolling display.
mpn: C1022, ean: 0789185844219,
Piano can work as a 2.0 (all frequencies are passed to LR) as a 2.2 (xover frequency is chosen in GUI) and subwoofer has 2 outputs or as a 2.1 (same as 2.2 but subwoofer is mono). We are using 2 DAC Ic's PCM5142 with integrated DSP. The PurePath software from TI is available for download (registration required) and can be used to create specific filters and other audio functions. The board will come pre-programed as a 2.1 output (but you can create your own custom design and load it the board
mpn: ABY, ean: 0759681008415,
Route one signal to two outputs or two inputs to one output. Choose A B or A & B combined. Unit requires a battery or 9V DC Power Supply for LED illumination, but all other functionality will work without.Route one signal to two outputs or two inputs to one output.. Choose A B or A & B combined.. Battery or 9V DC Power Supply for LED. All other functionality will work without battery power..
mpn: DIB 443, ean: 0971476195371,
Hosa Passive Direct BoxUse the Sidekick to ''go direct'' for a pure, clean, noise-free tone that is perfect for Digital Signal Processing (DSP) or throw the INST/LINE switch to LINE position to allow your amp to drive the line for a natural, overdriven tone. The Sidekick Passive DI Box by Hosa Technology makes it easy to connect your guitar, bass, or keyboard directly to a mixing console. Electric guitars, basses, and keyboards. Pedal effects and effects processors. Any electronic musical